Lexmark 58: Too many optional trays are attached for the printer
Lexmark 58 means too many optional trays are attached for the printer configuration. This guidance is specific to CX532/CX635/XC2335/XC2342 platform and the Finisher / Output / Accessory subsystem. Compare the attached tray configuration with the supported option combinations for this model and remove.
Error meaning
Too many optional trays are attached for the printer configuration.
This interpretation is tied to the reviewed family/platform and subsystem. Do not reuse the visible code by itself on another printer family.
Applies to
CX532/CX635/XC2335/XC2342 platform
- CX532
- CX635
- XC2335
- XC2342
Common formatting
These are lookup or formatting aliases for this reviewed condition, not separate pages.
- 58
What usually causes it
- Error 58 means the printer configuration has more optional trays attached than the platform supports. It is an installed-option count problem rather than a paper-size mismatch inside one tray.
- The exact reviewed condition is: Too many optional trays are attached for the printer configuration.
- Compare the attached tray configuration with the supported option combinations for this model and remove or correct only the unsupported extra tray arrangement.
What to try
Check the condition this code actually names
Compare the attached tray configuration with the supported option combinations for this model and remove or correct only the unsupported extra tray arrangement.
Keep the test focused
Change only the setting, supply, paper path, or component named above. Leave unrelated network, driver, and service settings alone so the retest tells you something useful.
Run a controlled confirmation test
Restart with the supported tray configuration and confirm each remaining tray is detected before retrying the original print job.
After each corrective action
Retry the original operation that produced 58. If it works, stop there rather than moving into unrelated troubleshooting.
If the code returns
If 58 remains with a supported number of trays, record which optional trays are installed and which ones the printer reports at startup.
When service may be needed
Do not alter internal option-detection wiring or force an unsupported hardware stack. Persistent detection errors with a supported configuration need service.
Continue with guided troubleshooting
If the printer still is not working after the reviewed checks, carry this verified error context into the guided troubleshooter.
Related information
Verified source
Lexmark CX532/CX635/XC2335/XC2342 User's Guide. Meaning and troubleshooting are paraphrased for this reviewed scope.