Xerox VersaLink B7025/B7030/B7035 — 005-125/005-145
Xerox 005-125/005-145 means the duplex automatic document feeder registration sensor reports a jam. The guidance here is specific to VersaLink B7025/B7030/B7035 and the DADF/document feeder operation.
Error meaning
The duplex automatic document feeder registration sensor reports a jam.
This interpretation is tied to the reviewed family/platform and subsystem. Do not reuse the code by itself on another printer family.
Applies to
VersaLink B7025/B7030/B7035
- VersaLink B7025
- VersaLink B7030
- VersaLink B7035
Common formatting
These are lookup/formatting aliases for this reviewed condition, not separate pages.
- 005-125/005-145
What usually causes it
- The duplex automatic document feeder did not register an original at the expected sensor. This affects originals being scanned or copied through the feeder, not printer paper coming from the print trays.
- The exact condition recorded for this code is: The duplex automatic document feeder registration sensor reports a jam.
- Open the feeder only at normal jam-clearance points, remove folded or torn originals, fan and square the remaining pages, and clean accessible feeder rollers/glass strips if the user guide permits it.
What to try
Check the condition this code actually names
Clear feeder originals/obstructions and clean accessible feeder rollers before retrying.
Isolate the affected part of the workflow
Open the feeder only at normal jam-clearance points, remove folded or torn originals, fan and square the remaining pages, and clean accessible feeder rollers/glass strips if the user guide permits it.
Run a controlled confirmation test
Test with a few clean, flat originals of normal size. Also try the scanner glass: if flatbed scanning works while the feeder repeats the code, the fault is isolated to the DADF path.
After each corrective action
Retry the original operation that produced 005-125/005-145. If it works, stop there rather than moving into unrelated troubleshooting.
If the code returns
If the code returns, record whether the first sheet enters the feeder and where it stops. A repeatable stopping point is more useful than repeatedly changing scan software.
When service may be needed
Do not disassemble the feeder sensor mechanism. Persistent DADF registration jams after normal clearance and cleaning need service.
Continue with guided troubleshooting
If the printer still is not working after the reviewed checks, carry this verified error context into the guided troubleshooter.
Related information
Verified source
Official Xerox VersaLink B7025/B7030/B7035 support article.